First experement of 3D working model
(One) Chicken Wire was used for the frame then covered with Plaster of Paris with various sized tins and bottles with various sized holes cut out, hanging from the frame, a fish tank water pump was inserted inside the model feeding through plastic tubing was then attatched to various points. After the 3D model was completed, I decided that this was not up to the required standard and didnot look right aesthetiically. Furthermore the fish tank pump was to small and wouldnot pump the water round the model effecently. The 3D model was to heavy because of the weight of the Plaster of Paris and the board it sat on was to large.
No comments:
Post a Comment